LOCTITE® 222
If you’re working with small-diameter screws made of low-strength metals (e.g. aluminium or brass), try LOCTITE® 222. It is ideal for low-strength threadlocking of adjustment screws, countersunk head screws, and set screws.
- Ideal for low-strength threadlocking of adjustment screws, countersunk head screws and set screws
- Prevents fastener loosening on vibrating assemblies, e.g. pumps, gear boxes, presses
- Ideal for small thread sizes up to 6.35 mm (1/4″)
- Can be disassembled with ordinary hand tools for easy service and maintenance
Technical Information
| Agency approvals / certificates / specifications, Regional approval for Europe only | NSF P1 Reg. No 123002 |
| Application method | Dispense system, Manual |
| Application temperature | -55.0 – 150.0 °C (-65.0 – 300.0 °F ) |
| Applications | Threadlocking |
| Breakaway torque, M10 Steel Nuts/Bolts | 6.0 N·m (50.0 in./lb. ) |
| Color | Purple |
| Cure type | Anaerobic cure |
| Fixture time | 20.0 min. |
| Key characteristics | Disassembly: removable, Fluorescent, General purpose, Mix: no mix required, Strength: low Strength, Thixotropic |
| Physical form | Liquid |
| Prevail torque, M10 Steel Nuts/Bolts | 4.0 N·m (35.0 in./lb. ) |
| Recommended for use with | Metal, Metal: passive metal |
| Viscosity, Speed 20 RPM | 1200.0 mPa·s (cP) |